dmesg - PandaBoard ES
Booting Linux on physical CPU 0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.4.0-201-omap4 (buildd@ishigaq) (gcc version 4.7.0 (Ubuntu/Linaro 4.7.0-7ubuntu4) ) #3-Ubuntu SMP PREEMPT Tue May 29 15:33:03 UTC 2012 (Ubuntu 3.4.0-201.3-omap4 3.4.0)
CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: OMAP4 Panda board
Memory policy: ECC disabled, Data cache writealloc
omap2_set_globals_tap
On node 0 totalpages: 261888
free_area_init_node: node 0, pgdat c0941f00, node_mem_map c0a0d000
Normal zone: 1520 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 192784 pages, LIFO batch:31
HighMem zone: 528 pages used for memmap
HighMem zone: 67056 pages, LIFO batch:15
omap2_set_globals_tap
OMAP4460 ES1.1
PERCPU: Embedded 8 pages/cpu @c1216000 s11264 r8192 d13312 u32768
pcpu-alloc: s11264 r8192 d13312 u32768 alloc=8*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
Kernel command line: ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
allocated 2097152 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Memory: 759MB 264MB = 1023MB total
Memory: 1021372k/1021372k available, 27204k reserved, 270336K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0865264 (8565 kB)
.init : 0xc0866000 - 0xc08c7c00 ( 391 kB)
.data : 0xc08c8000 - 0xc0945cb8 ( 504 kB)
.bss : 0xc0945cdc - 0xc0a0c844 ( 795 kB)
SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
NR_IRQS:538
OMAP clockevent source: GPTIMER1 at 32768 Hz
sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
Console: colour dummy device 80x30
console [tty0] enabled
Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
ftrace: allocating 23034 entries in 68 pages
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
Setting up static identity map for 0x805a2688 - 0x805a26e0
L310 cache controller enabled
l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7e470000, Cache size: 1048576 B
generating sar_ram layout...
sar ram layout created
CPU1: Booted secondary processor
CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
CPU1: Unknown IPI message 0x1
Brought up 2 CPUs
SMP: Total of 2 processors activated (2792.83 BogoMIPS).
devtmpfs: initialized
omap_sr_disable: omap_sr struct for sr_core not found
omap_sr_disable: omap_sr struct for sr_core not found
omap_sr_disable: omap_sr struct for sr_core not found
omap_sr_disable: omap_sr struct for sr_core not found
omap_sr_disable: omap_sr struct for sr_core not found
omap_sr_disable: omap_sr struct for sr_core not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_core not found
omap_sr_disable: omap_sr struct for sr_core not found
omap_hwmod: aess: _wait_target_disable failed
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_core not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_hwmod: mcpdm: cannot be enabled (3)
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
dummy:
NET: Registered protocol family 16
Trying to unpack rootfs image as initramfs...
GPMC revision 6.0
gpiochip_add: registered GPIOs 0 to 31 on device: gpio
OMAP GPIO hardware version 0.1
gpiochip_add: registered GPIOs 32 to 63 on device: gpio
gpiochip_add: registered GPIOs 64 to 95 on device: gpio
gpiochip_add: registered GPIOs 96 to 127 on device: gpio
gpiochip_add: registered GPIOs 128 to 159 on device: gpio
gpiochip_add: registered GPIOs 160 to 191 on device: gpio
omap_mux_init: Add partition: #1: core, flags: 2
omap_mux_init: Add partition: #2: wkup, flags: 2
omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts
omap_hwmod_mux_init: Could not allocate device mux entry
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
omap-mcbsp.1: alias pad_fck already exists
omap-mcbsp.2: alias pad_fck already exists
omap-mcbsp.3: alias pad_fck already exists
omap-mcbsp.4: alias pad_fck already exists
omap4plus_scm.0: alias fck already exists
OMAP DMA hardware revision 0.0
emif emif.1: Device configured with addr = fd100000 and IRQ142
emif emif.2: Device configured with addr = fd200000 and IRQ143
bio: create slab at 0
vwl1271: 1800 mV
SCSI subsystem initialized
libata version 3.00 loaded.
omap2_mcspi omap2_mcspi.1: master is unqueued, this is deprecated
omap2_mcspi omap2_mcspi.2: master is unqueued, this is deprecated
omap2_mcspi omap2_mcspi.3: master is unqueued, this is deprecated
omap2_mcspi omap2_mcspi.4: master is unqueued, this is deprecated
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 400 kHz
Skipping twl internal clock init and using bootloader value (unknown osc rate)
twl 1-0048: PIH (irq 39) chaining IRQs 416..436
VUSB: 3300 mV normal standby
twl6030_usb twl6030_usb: Initialized TWL6030 USB module
V1V8: 1800 mV normal standby
V2V1: 2100 mV normal standby
VMMC: 1200 3000 mV at 3000 mV normal standby
VPP: 1800 2500 mV at 1900 mV normal standby
VCXIO: 1800 mV normal standby
VCXIO: supplied by V2V1
VDAC: 1800 mV normal standby
VDAC: supplied by V2V1
VAUX2_6030: 1200 2800 mV at 1800 mV normal standby
VAUX3_6030: 1000 3000 mV at 1200 mV normal standby
CLK32KG:
VANA: 2100 mV normal standby
omap_i2c omap_i2c.2: bus 2 rev2.4.0 at 400 kHz
omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
omap_i2c omap_i2c.4: bus 4 rev2.4.0 at 400 kHz
Linux media interface: v0.10
Linux video capture interface: v2.00
Advanced Linux Sound Architecture Driver Version 1.0.25.
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource 32k_counter
FS-Cache: Loaded
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
usbhs_omap usbhs_omap: ehci_logic_fck failed:-2
Freeing initrd memory: 4752K
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
audit: initializing netlink socket (disabled)
type=2000 audit(0.750:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.18)
msgmni has been set to 1476
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
OMAP DSS rev 4.0
hdmi_panel_init **********************
ENTER hdmi_panel_probe
omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
(stk) :sysfs entries created
(stk) : debugfs entries created
Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
usbcore: registered new interface driver smsc95xx
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
ehci-omap.0 supply hsusb0 not found, using dummy regulator
ehci-omap ehci-omap.0: reset hcs_params 0x1313 dbg=0 cc=1 pcc=3 ordered ports=3
ehci-omap ehci-omap.0: reset hcc_params 20016 thresh 1 uframes 256/512/1024 park LPM
ehci-omap ehci-omap.0: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
ehci-omap ehci-omap.0: park 0
ehci-omap ehci-omap.0: support lpm
ehci-omap ehci-omap.0: irq 109, io mem 0x4a064c00
ehci-omap ehci-omap.0: init command 0010005 (park)=0 ithresh=1 period=512 RUN
ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
usb usb1: default language 0x0409
usb usb1: udev 1, busnum 1, minor = 0
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: OMAP-EHCI Host Controller
usb usb1: Manufacturer: Linux 3.4.0-201-omap4 ehci_hcd
usb usb1: SerialNumber: ehci-omap.0
usb usb1: usb_probe_device
usb usb1: configuration #1 chosen from 1 choice
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: individual port power switching
hub 1-0:1.0: individual port over-current protection
hub 1-0:1.0: power on to power good time: 20ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: enabling power on all ports
ehci-omap ehci-omap.0: ...powerup ports...
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: block sizes: ed 64 td 64
ohci-omap3 ohci-omap3.0: OMAP3 OHCI Host Controller
ohci-omap3 ohci-omap3.0: new USB bus registered, assigned bus number 2
ohci-omap3 ohci-omap3.0: starting OHCI controller
ohci-omap3 ohci-omap3.0: created debug files
ohci-omap3 ohci-omap3.0: irq 108, io mem 0x4a064800
ehci-omap ehci-omap.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1: status 0501 change 0001
ohci-omap3 ohci-omap3.0: OHCI controller state
ohci-omap3 ohci-omap3.0: OHCI 1.0, NO legacy support registers, rh state running
ohci-omap3 ohci-omap3.0: control 0x283 RWC HCFS=operational CBSR=3
ohci-omap3 ohci-omap3.0: cmdstatus 0x00000 SOC=0
ohci-omap3 ohci-omap3.0: intrstatus 0x00000004 SF
ohci-omap3 ohci-omap3.0: intrenable 0x8000005a MIE RHSC UE RD WDH
ohci-omap3 ohci-omap3.0: hcca frame #0015
ohci-omap3 ohci-omap3.0: roothub.a 0a000203 POTPGT=10 NPS NDP=3(3)
ohci-omap3 ohci-omap3.0: roothub.b 00000000 PPCM=0000 DR=0000
ohci-omap3 ohci-omap3.0: roothub.status 00008000 DRWE
ohci-omap3 ohci-omap3.0: roothub.portstatus [0] 0x00000100 PPS
ohci-omap3 ohci-omap3.0: roothub.portstatus [1] 0x00000100 PPS
ohci-omap3 ohci-omap3.0: roothub.portstatus [2] 0x00000100 PPS
usb usb2: default language 0x0409
usb usb2: udev 1, busnum 2, minor = 128
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OMAP3 OHCI Host Controller
usb usb2: Manufacturer: Linux 3.4.0-201-omap4 ohci_hcd
usb usb2: SerialNumber: ohci-omap3.0
usb usb2: usb_probe_device
usb usb2: configuration #1 chosen from 1 choice
usb usb2: adding 2-0:1.0 (config #1, interface 0)
hub 2-0:1.0: usb_probe_interface
hub 2-0:1.0: usb_probe_interface - got id
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
hub 2-0:1.0: standalone hub
hub 2-0:1.0: no power switching (usb 1.0)
hub 2-0:1.0: global over-current protection
hub 2-0:1.0: power on to power good time: 20ms
hub 2-0:1.0: local power source is good
hub 2-0:1.0: no over-current condition exists
hub 2-0:1.0: trying to enable port power on non-switchable hub
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
musb-hdrc: MHDRC RTL version 2.0
musb-hdrc: setup fifo_mode 4
musb-hdrc: 28/31 max ep, 16384/16384 memory
musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
mousedev: PS/2 mouse device common for all mice
twl_rtc twl_rtc: Power up reset detected.
twl_rtc twl_rtc: Enabling TWL-RTC
twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
omap_hsmmc.0 supply vmmc_aux not found, using dummy regulator
hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000
hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
omap_hsmmc.4 supply vmmc_aux not found, using dummy regulator
ehci-omap ehci-omap.0: port 1 high speed
ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
usb 1-1: new high-speed USB device number 2 using ehci-omap
thermal_governor_dev_register:Adding omap_ongpu_governor governor
thermal_get_slope:Getting slope is not supported for domain gpu
thermal_get_offset:Getting offset is not supported for domain gpu
OMAP4/5 SoC init
aess aess: ABE Firmware version 9542
omap_sr_disable: omap_sr struct for sr_iva not found
omap_sr_disable: omap_sr struct for sr_iva not found
asoc: snd-soc-dummy-dai MultiMedia1 mapping ok
asoc: snd-soc-dummy-dai MultiMedia2 mapping ok
asoc: snd-soc-dummy-dai Voice mapping ok
asoc: snd-soc-dummy-dai Tones mapping ok
asoc: snd-soc-dummy-dai Vibra mapping ok
asoc: snd-soc-dummy-dai MODEM mapping ok
asoc: snd-soc-dummy-dai MultiMedia1 LP mapping ok
asoc: snd-soc-dummy-dai omap-mcbsp.2 mapping ok
asoc: twl6040-legacy mcpdm-legacy mapping ok
asoc: twl6040-dl1 mcpdm-dl1 mapping ok
asoc: twl6040-ul mcpdm-ul1 mapping ok
asoc: twl6040-dl2 mcpdm-dl2 mapping ok
asoc: twl6040-vib mcpdm-vib mapping ok
asoc: snd-soc-dummy-dai omap-mcbsp.1 mapping ok
asoc: snd-soc-dummy-dai omap-mcbsp.1 mapping ok
asoc: snd-soc-dummy-dai omap-mcbsp.2 mapping ok
asoc: omap-hdmi-hifi omap-hdmi-audio-dai mapping ok
u32 classifier
Actions configured
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
lib80211_crypt: registered algorithm 'WEP'
lib80211_crypt: registered algorithm 'CCMP'
lib80211_crypt: registered algorithm 'TKIP'
Registering the dns_resolver key type
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
omap_sr_disable: omap_sr struct for sr_mpu not found
omap_sr_disable: omap_sr struct for sr_core not found
Power Management for TI OMAP4XX/OMAP5XXX devices.
hwmod gpmc not found
sr_init: No PMIC hook to init smartreflex
smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
SmartReflex Class3 initialized
ehci-omap ehci-omap.0: port 1 high speed
ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
registered taskstats version 1
VANA: incomplete constraints, leaving on
CLK32KG: incomplete constraints, leaving on
mmc0: host does not support reading read-only switch. assuming write-enable.
VDAC: incomplete constraints, leaving on
VUSB: incomplete constraints, leaving on
twl_rtc twl_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
mmc0: new high speed SDHC card at address 0007
mmcblk0: mmc0:0007 SD16G 14.9 GiB
dmm dmm: initialized all PAT entries
omapdrm omapdrm.0: dvi has no driver.. skipping it
mmcblk0: p1 p2
usb 1-1: udev 2, busnum 1, minor = 1
usb 1-1: New USB device found, idVendor=0424, idProduct=9514
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: usb_probe_device
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
hub 1-1:1.0: usb_probe_interface
hub 1-1:1.0: usb_probe_interface - got id
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 5 ports detected
hub 1-1:1.0: compound device; port removable status: FRRRR
hub 1-1:1.0: individual port power switching
hub 1-1:1.0: individual port over-current protection
hub 1-1:1.0: TT per port
hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
hub 1-1:1.0: power on to power good time: 100ms
hub 1-1:1.0: local power source is good
hub 1-1:1.0: enabling power on all ports
hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
hub 1-1:1.0: port 1: status 0101 change 0001
hub 1-1:1.0: port 3: status 0101 change 0001
mmc1: card claims to support voltages below the defined range. These will be ignored.
mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
mmc1: new SDIO card at address 0001
usb 1-1: link qh256-0001/c30f9100 start 1 [1/0 us]
hub 1-1:1.0: state 7 ports 5 chg 000a evt 0000
hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
usb 1-1.1: new high-speed USB device number 3 using ehci-omap
usb 1-1.1: udev 3, busnum 1, minor = 2
usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1.1: usb_probe_device
usb 1-1.1: configuration #1 chosen from 1 choice
usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
smsc95xx 1-1.1:1.0: usb_probe_interface
smsc95xx 1-1.1:1.0: usb_probe_interface - got id
smsc95xx v1.0.4
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend, wakeup 1
ohci-omap3 ohci-omap3.0: suspend root hub
smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-ehci-omap.0-1.1, smsc95xx USB 2.0 Ethernet, 0e:60:cb:ca:46:01
hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
omapdss DISPC error: SYNC_LOST on channel tv, restarting the output with video overlays disabled
usb 1-1.3: new full-speed USB device number 4 using ehci-omap
[drm] Enabling DMM ywrap scrolling
usb 1-1.3: ep0 maxpacket = 8
usb 1-1.3: default language 0x0409
usb 1-1.3: udev 4, busnum 1, minor = 3
usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: FT232R USB UART
usb 1-1.3: Manufacturer: FTDI
usb 1-1.3: SerialNumber: A800fq8V
usb 1-1.3: usb_probe_device
usb 1-1.3: configuration #1 chosen from 1 choice
usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008
omapdss error: HPD IRQ request failed
Console: switching to colour frame buffer device 240x67
fb0: omapdrm frame buffer device
drm: registered panic notifier
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] No driver support for vblank timestamp query.
[drm] Initialized omapdrm 1.0.0 20110917 on minor 0
ALSA device list:
#0: PandaBoardES
#1: OMAPHDMI
Freeing init memory: 388K
udevd[107]: starting version 175
Btrfs loaded
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
ADDRCONF(NETDEV_UP): eth0: link is not ready
udevd[322]: starting version 175
EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
Registered led device: pandaboard::status1
Registered led device: pandaboard::status2
Adding 524240k swap on /SWAP.swap. Priority:-1 extents:11 across:571384k SS
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
device-mapper: multipath: version 1.3.0 loaded
type=1400 audit(946684810.522:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=550 comm="apparmor_parser"
type=1400 audit(946684810.522:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=550 comm="apparmor_parser"
type=1400 audit(946684810.522:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=550 comm="apparmor_parser"
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(946684810.788:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=569 comm="apparmor_parser"
type=1400 audit(946684810.788:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=569 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
init: failsafe main process (607) killed by TERM signal
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
usbserial_generic 1-1.3:1.0: usb_probe_interface
usbserial_generic 1-1.3:1.0: usb_probe_interface - got id
usbcore: registered new interface driver ftdi_sio
USB Serial support registered for FTDI USB Serial Device
ftdi_sio 1-1.3:1.0: usb_probe_interface
ftdi_sio 1-1.3:1.0: usb_probe_interface - got id
ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.3: Detected FT232RL
usb 1-1.3: Number of endpoints 2
usb 1-1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.3: Setting MaxPacketSize 64
usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
type=1400 audit(946684811.843:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=756 comm="apparmor_parser"
type=1400 audit(946684811.843:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=756 comm="apparmor_parser"
type=1400 audit(946684811.843:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=756 comm="apparmor_parser"
type=1400 audit(946684811.858:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=755 comm="apparmor_parser"
type=1400 audit(946684811.890:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=760 comm="apparmor_parser"
cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: Disabling freq 5035 MHz
cfg80211: Disabling freq 5040 MHz
cfg80211: Disabling freq 5045 MHz
cfg80211: Disabling freq 5055 MHz
cfg80211: Disabling freq 5060 MHz
cfg80211: Disabling freq 5080 MHz
cfg80211: Disabling freq 5170 MHz
cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5190 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5210 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5230 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Disabling freq 5260 MHz
cfg80211: Disabling freq 5280 MHz
cfg80211: Disabling freq 5300 MHz
cfg80211: Disabling freq 5320 MHz
cfg80211: Disabling freq 5500 MHz
cfg80211: Disabling freq 5520 MHz
cfg80211: Disabling freq 5540 MHz
cfg80211: Disabling freq 5560 MHz
cfg80211: Disabling freq 5580 MHz
cfg80211: Disabling freq 5600 MHz
cfg80211: Disabling freq 5620 MHz
cfg80211: Disabling freq 5640 MHz
cfg80211: Disabling freq 5660 MHz
cfg80211: Disabling freq 5680 MHz
cfg80211: Disabling freq 5700 MHz
cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
wl12xx: loaded
init: Failed to spawn hybrid-gfx main process: unable to execute: No such file or directory
wl12xx: firmware booted (Rev 6.3.5.0.98)
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
usb 1-1.1: link qh8-0001/eeb05280 start 2 [1/0 us]
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth0: link is not ready
wl12xx: ERROR ELP wakeup timeout!
wl12xx: Reading FW panic log
------------[ cut here ]------------
Modules linked in: wl12xx mac80211 cfg80211 ftdi_sio usbserial bnep rfcomm bluetooth ppdev dm_multipath lp parport wl12xx_sdio leds_gpio btrfs zlib_deflate libcrc32c dm_mirror dm_region_hash dm_log
[] (unwind_backtrace+0x0/0xec) from [] (dump_stack+0x20/0x24)
[] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x74)
[] (warn_slowpath_common+0x5c/0x74) from [] (warn_slowpath_null+0x2c/0x34)
[] (warn_slowpath_null+0x2c/0x34) from [] (wl1271_cmd_send+0x64/0x360 [wl12xx])
[] (wl1271_cmd_send+0x64/0x360 [wl12xx]) from [] (wl12xx_cmd_stop_fwlog+0x64/0x98 [wl12xx])
[] (wl12xx_cmd_stop_fwlog+0x64/0x98 [wl12xx]) from [] (wl1271_recovery_work+0xc4/0x308 [wl12xx])
[] (wl1271_recovery_work+0xc4/0x308 [wl12xx]) from [] (process_one_work+0x244/0x458)
[] (process_one_work+0x244/0x458) from [] (worker_thread+0x1ac/0x2d0)
[] (worker_thread+0x1ac/0x2d0) from [] (kthread+0x9c/0xac)
[] (kthread+0x9c/0xac) from [] (kernel_thread_exit+0x0/0x8)
---[ end trace 16ccd74170f63146 ]---
wl12xx: Hardware recovery in progress. FW ver: Rev 6.3.5.0.98 pc: 0x0
wl12xx: down
ieee80211 phy0: Hardware restart was requested
wl12xx: firmware booted (Rev 6.3.5.0.98)
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
usb usb2: usb auto-resume
ohci-omap3 ohci-omap3.0: resume root hub
hub 2-0:1.0: hub_resume
hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
deprecated_sysctl_warning: 36 callbacks suppressed
warning: process `colord' used the deprecated sysctl system call with 8.1.2.
OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink
OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink
OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink
OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink
OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink
OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink
OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink
OMAP ABE Media: asoc: OMAP ABE Media no valid playback route from source to sink
OMAP ABE Media: asoc: OMAP ABE Media no valid capture route from source to sink
OMAP ABE Media: asoc: OMAP ABE Media no valid capture route from source to sink
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend, wakeup 1
ohci-omap3 ohci-omap3.0: suspend root hub
usb usb2: usb auto-resume
ohci-omap3 ohci-omap3.0: resume root hub
hub 2-0:1.0: hub_resume
hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000
wl12xx: ERROR ELP wakeup timeout!
wl12xx: Reading FW panic log
------------[ cut here ]------------
Modules linked in: wl12xx mac80211 cfg80211 ftdi_sio usbserial bnep rfcomm bluetooth ppdev dm_multipath lp parport wl12xx_sdio leds_gpio btrfs zlib_deflate libcrc32c dm_mirror dm_region_hash dm_log
[] (unwind_backtrace+0x0/0xec) from [] (dump_stack+0x20/0x24)
[] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x74)
[] (warn_slowpath_common+0x5c/0x74) from [] (warn_slowpath_null+0x2c/0x34)
[] (warn_slowpath_null+0x2c/0x34) from [] (wl1271_cmd_send+0x64/0x360 [wl12xx])
[] (wl1271_cmd_send+0x64/0x360 [wl12xx]) from [] (wl12xx_cmd_stop_fwlog+0x64/0x98 [wl12xx])
[] (wl12xx_cmd_stop_fwlog+0x64/0x98 [wl12xx]) from [] (wl1271_recovery_work+0xc4/0x308 [wl12xx])
[] (wl1271_recovery_work+0xc4/0x308 [wl12xx]) from [] (process_one_work+0x244/0x458)
[] (process_one_work+0x244/0x458) from [] (worker_thread+0x1ac/0x2d0)
[] (worker_thread+0x1ac/0x2d0) from [] (kthread+0x9c/0xac)
[] (kthread+0x9c/0xac) from [] (kernel_thread_exit+0x0/0x8)
---[ end trace 16ccd74170f63147 ]---
wl12xx: Hardware recovery in progress. FW ver: Rev 6.3.5.0.98 pc: 0x0
wl12xx: down
ieee80211 phy0: Hardware restart was requested
------------[ cut here ]------------
WARNING: at /build/buildd/linux-ti-omap4-3.4.0/net/mac80211/main.c:324 ieee80211_restart_work+0x88/0x98 [mac80211]()
ieee80211_restart_work called with hardware scan in progress
Modules linked in: wl12xx mac80211 cfg80211 ftdi_sio usbserial bnep rfcomm bluetooth ppdev dm_multipath lp parport wl12xx_sdio leds_gpio btrfs zlib_deflate libcrc32c dm_mirror dm_region_hash dm_log
[] (unwind_backtrace+0x0/0xec) from [] (dump_stack+0x20/0x24)
[] (dump_stack+0x20/0x24) from [] (warn_slowpath_common+0x5c/0x74)
[] (warn_slowpath_common+0x5c/0x74) from [] (warn_slowpath_fmt+0x40/0x48)
[] (warn_slowpath_fmt+0x40/0x48) from [] (ieee80211_restart_work+0x88/0x98 [mac80211])
[] (ieee80211_restart_work+0x88/0x98 [mac80211]) from [] (process_one_work+0x244/0x458)
[] (process_one_work+0x244/0x458) from [] (worker_thread+0x1ac/0x2d0)
[] (worker_thread+0x1ac/0x2d0) from [] (kthread+0x9c/0xac)
[] (kthread+0x9c/0xac) from [] (kernel_thread_exit+0x0/0x8)
---[ end trace 16ccd74170f63148 ]---
eth0: no IPv6 routers present
wl12xx: firmware booted (Rev 6.3.5.0.98)
hub 2-0:1.0: hub_suspend
usb usb2: bus auto-suspend, wakeup 1
ohci-omap3 ohci-omap3.0: suspend root hub
omapdss error: HPD IRQ request failed
omapdss error: HPD IRQ request failed
hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008
hub 1-1:1.0: port 3, status 0100, change 0001, 12 Mb/s
usb 1-1.3: USB disconnect, device number 4
usb 1-1.3: unregistering device
usb 1-1.3: unregistering interface 1-1.3:1.0
ftdi_sio ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -19
ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
ftdi_sio 1-1.3:1.0: device disconnected
usb 1-1.3: usb_disable_device nuking all URBs
hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008
hub 1-1:1.0: port 3, status 0101, change 0001, 12 Mb/s
hub 1-1:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
usb 1-1.3: new full-speed USB device number 5 using ehci-omap
usb 1-1.3: ep0 maxpacket = 8
usb 1-1.3: default language 0x0409
usb 1-1.3: udev 5, busnum 1, minor = 4
usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: FT232R USB UART
usb 1-1.3: Manufacturer: FTDI
usb 1-1.3: SerialNumber: A800fq8V
usb 1-1.3: usb_probe_device
usb 1-1.3: configuration #1 chosen from 1 choice
usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0)
usbserial_generic 1-1.3:1.0: usb_probe_interface
usbserial_generic 1-1.3:1.0: usb_probe_interface - got id
ftdi_sio 1-1.3:1.0: usb_probe_interface
ftdi_sio 1-1.3:1.0: usb_probe_interface - got id
ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
usb 1-1.3: Detected FT232RL
usb 1-1.3: Number of endpoints 2
usb 1-1.3: Endpoint 1 MaxPacketSize 64
usb 1-1.3: Endpoint 2 MaxPacketSize 64
usb 1-1.3: Setting MaxPacketSize 64
usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB0
hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0008